How to Jump Start a Car: The Step-by-Step Guide

We’ve all been there – you turn the key in your car, and nothing happens. Your battery is dead, and you’re stranded. Fear not! With a set of jumper cables and another vehicle, you can jump start your car and be on your way in no time. Here’s how:

Step 1: Get Your Supplies

Before you begin, make sure you have the necessary supplies. You’ll need jumper cables (also known as booster cables) and another vehicle with a working battery. Make sure both vehicles are turned off before proceeding.

Step 2: Position the Vehicles

Position the vehicles so that their batteries are close enough for the jumper cables to reach but not touching each other. It’s important to keep the vehicles from touching as this could cause an electrical spark.

Step 3: Connect the Jumper Cables

Connect one end of the red jumper cable (positive) to the positive terminal of the dead battery. Connect the other end of the red cable to the positive terminal of the working battery.

Next, connect one end of the black jumper cable (negative) to the negative terminal of the working battery. DO NOT connect it to the negative terminal of the dead battery!

Instead, connect it to an unpainted metal surface such as a bolt or bracket away from any moving parts or belts on your engine block.

Step 4: Start Up The Working Vehicle

Start up the vehicle with the working battery and let it run for a few minutes.

Step 5: Start Up The Dead Vehicle

Attempt to start up your dead vehicle. If it starts, great! Let both vehicles run for several minutes before disconnecting them.

If it doesn’t start right away, wait a few more minutes before trying again. If still unsuccessful after several attempts, seek professional assistance as there may be other issues at play.

Step 6: Disconnect The Cables

Once your dead vehicle has started successfully, carefully disconnect each cable in reverse order from how they were connected – black from metal surface first, then black from good battery, then red from good battery, and finally red from dead battery.

Do not let any of these clamps touch each other while doing so!

In conclusion, jumping starting a car is an essential skill every driver should know.

Using options such as getting necessary supplies , positioning vehicles correctly , connecting jumper cables correctly , starting up vehicles properly ,and disconnecting cables safely will help ensure success!

More Resources:

Tommy Watson – Reverbnation

How to Fix High Engine Temperature

Exit mobile version